![]() ![]() Sometimes when you are changing filament, the end of the filament might have a small bulge which is larger than the pathway for the filament. One user ended up getting the tube and turned it around to get it working again. ![]() You also don’t want a tube that’s too long and has many twists and turns. If you find that it is hard to push filament through the hotend, check that your PTFE tube isn’t damaged. Many times a clog will require a simple fix and you can go about printing as usual. This works best for jams which haven’t built up over time as so are weaker and not hardened to the inner extruder. You want to heat it around 5-10☌ higher to start with and after it’s at the desired temperature, try to push your filament through the extruder nozzle by hand from the top of the printer.įilament can become quite soft meaning it may not unclog the jam which leads into the second way of unclogging filament jammed in the extruder which is using a hard, thin object to get rid of built-up material and foreign objects such as dust. ![]() The simple and most easy fix for unclogging a jammed extruder nozzle is to heat up your hotend to a higher temperature than you usually do for your desired material. Heating Up Extruder Nozzle An Extra 5-10☌ Cetus3d extruder how to#6 How to Fix Ender 3 Nozzle That Keeps Clogging 1. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |